Connecting Rods
Part #: Mas-033
Description:  Factory rods for your 16v TC. 
Price: Call or e-mail for price

 

 

 

 

  

Chrysler's TC by Maserati 

Dodge IROC R/T
Dodge Spirit R/T
Shelby Charger GLHS
Shelby Omni GLHS
Shelby CSX (including CSX-T and VNT)
Shelby Lancer
Dodge Daytona Shelby Z, Lancer Shelby, Lebaron GTS, etc..

< Back to home page

Click links below to continue on !

16v Maserati

Thermostat
Part #: Mas-001
Description:  Factory Thermostat for the 16v Maserati engine.  Fits all 1989-1990 Maserati TC's equipped with the 2.2L DOHC 16v engine.
Price: Call or e-mail for price

Thermostat Housing gasket
Part #: Mas-002
Description:  Factory thermostat housing gasket.  This gasket goes between the two halves of the thermostat housing on your 2.2L DOHC powered Maserati TC.
Price: Call or e-mail for price

Thermostat Housing to head gasket
Part #: Mas-003
Description:  Factory gasket that goes between the thermostat housing and the head on all 16v DOHC powered Maserati TC's.
Price: Call or e-mail for price

Hose
Part #: Mas-004
Description:  Heater hose that runs from the thermostat over to the heater control valve on your 16v TC.
Price: Call or e-mail for price

Radiator Hose - Upper
Part #: Mas-005
Description:  Upper Radiator hose for 16v Maserati Engine
Price: Call or e-mail for price

Radiator Hose - Lower
Part #: Mas-006
Description:  Lower Radiator hose for 16v Maserati Engine
Price: Call or e-mail for price

Radiator
Part #: Mas-007
Description:  Radiator for 16v Maserati Engine (does not include intercooler)
Price: Call or e-mail for price

Radiator Fan & Shroud (used)
Part #: Mas-008
Description:  Radiator fan motor and shroud for use on 1990 Maserati TC w/16v engine. Requires some cutting to fit.  This slim line fan allows for much greater access to your fuel injectors, fuel rail, fuel pressure regulator, etc..
Price: Call or e-mail for price

Coolant Overflow Bottle
Part #: Mas-009
Description:  Radiator overflow bottle for all 1990 Maserati TC w/16v engine.  Dress up your engine bay with this brand new coolant overflow bottle!
Price: Call or e-mail for price

Spark plugs
Part #: Mas-010
Description:  New factory plugs for the 1989-1990 Maserati TC w/16v engine. These plugs typically come pre-gapped but you should always double check that they are gapped to .028" per the factory service manual.
Price: Call or e-mail for price

Spark plug wire set
Part #: Mas-011
Description:  New *improved* plug wire set for the 1989-1990 Maserati TC w/16v engine. These plug wires were made specifically for this engine and feature a boot which seals even better than factory!  They are larger (8.5mm vs the factory 7mm).  They will work perfectly on your bone stock Maserati TC or one that has been heavily modified as well. 
Price: Call or e-mail for price

Price list page 2 >

Cap and Rotor
Part #: Mas-012
Description:  Factory distributor cap and rotor for your 16v TC.  These should always be changed when performing a tune-up.
Price:  Call or e-mail for price

Valve cover grommets
Part #: Mas-013
Description:  Factory rubber valve cover grommets.  These fit all 16v TC's from 1989-1990.  Set of 7.  Includes new chrome washer with each grommet.
Price: Call or e-mail for price

Valve Cover gasket
Part #: Mas-014
Description:  Factory rubber valve cover gasket for all 1989-1990 16v powered TC's. 
Price:  $N/A    Presently out of stock

Spark Plug Valley Seals - Valve Cover
Part #: Mas-015
Description:  Valve cover valley seals - rubber.  These seal between the valve cover and head and do not allow oil to leak down into the spark plug holes.
Price: Call or e-mail for price

Head Gasket
Part #: Mas-016
Description:  New *improved* head gasket for the 1989-1990 Maserati TC w/16v engine. This multi-layer steel (MLS) head gasket is re-usable and is now made in an all stainless steel construction for improved life as well as improved sealing characteristics.  This head gasket will work perfectly on your stock 16v TC or one that has been heavily modified.  Available in a couple different thicknesses.   If you do not specify which thickness you want, you will receive a gasket in the stock thickness.
Price: Call or e-mail for price

Exhaust Manifold to head gaskets
Part #: Mas-017
Description:  "Exhaust manifold to cylinder head" gaskets for the 1989-1990 Maserati TC w/16v engine. These gaskets are made of a material designed to withstand temps in excess of 2,000 deg F.  Designed for maximum sealing.
Price: Call or e-mail for price

Intake Manifold to head gaskets
Part #: Mas-018
Description:  New *improved* intake gaskets for the 1989-1990 Maserati TC w/16v engine. These gaskets were made specifically for this engine and feature a material which is entirely different than what the factory used.   The factory used an inferior gasket which cannot be properly modified when porting and polishing (enlarging of the ports) of the intake manifold is desired.  Gaskets come sized to run on stock engines but can be modified (ground) out to match your intake manifold and head.
Price: Call or e-mail for price

Exhaust Manifold to Turbocharger gasket
Part #: Mas-019
Description:  Exhaust manifold-to-turbo gasket for the 1989-1990 Maserati TC w/16v engine. These gaskets were made specifically for this engine and feature a material that can withstand temps in excess of 2,000 degF.  Designed for maximum sealing.
Price: Call or e-mail for price

Cam Seals
Part #: Mas-020
Description:  Factory camshaft seals for the 1989-1990 Maserati TC w/16v engine.
Price: Call or e-mail for price

Lower engine gasket set
Part #: Mas-021
Description:  Lower engine gasket set for the **early production** 1989-1990 Maserati TC w/16v engine.
Price: Call or e-mail for price

Lower engine gasket set
Part #: Mas-022
Description:  Lower engine gasket set for the **late production** 1989-1990 Maserati TC w/16v COMMON BLOCK engine.  If you don't know which engine your TC has call me or drop me a line and I'll let you know based on your Vehicle's VIN #.
Price: Call or e-mail for price

Head Bolts
Part #: Mas-023
Description:  Factory head bolts for your 16v TC.  These heads bolts will fit all TC's with 16v engine (both early and late production).
Price: Call or e-mail for price

Head Studs
Part #: Mas-024
Description:  Head stud kit for the 16v TC.  These head head studs will fit all TC's with 16v engine (both early and late production).  They offer a vastly improved (more evenly distributed) clamping force over the stock (production) head bolts.
Price: Call or e-mail for price

Shims
Part #: Mas-025
Description:  Valve lash adjust shims for the 16v TC.  Available in a variety of thicknesses.  Call or email with your specific needs.  We must determine if you have an early or late build motor as they both use completely different shims!
Price: Call or e-mail for price

Camshafts
Part #: Mas-026
Description:  Factory camshafts for your 16v TC.  These camshafts will fit all TC's with 16v engine (both early and late production).  Very limited quantities call or email with your needs.
Price: $N/A

Cylinder Head casting
Part #: Mas-027
Description:  Factory DOHC cylinder head for your 16v TC.  Very limited quantities call or email with your needs.
Price: $N/A

Rebuilt Cylinder Head Assembly - Complete
Part #: Mas-028
Description:  Factory complete DOHC cylinder head for your 16v TC.  Professionally rebuilt - each head's lash is meticulously set by RDI Performance's expert staff and checked before they leave the premises.  Very limited quantities call or email with your needs.
Price: $N/A

Rebuilt Engine Block Assembly - Complete
Part #: Mas-029
Description:  Complete short block for your 16v TC.  Professionally rebuilt - each block is hand assembled here at RDI Performance.  All specs are checked and recorded (specs available upon request) before they leave the premises.  Very limited quantities call or email with your needs.
Price: $N/A

Pistons
Part #: Mas-030
Description:  Brand new (in the box) Factory forged pistons in stock bore size. 
Price: Call or e-mail for price

Pistons - Oversize
Part #: Mas-031
Description:  Brand new fully forged JE pistons in a number of oversizes.  Call or email with your exact needs. 
Price: Call or e-mail for price

Crankshaft
Part #: Mas-032
Description:  Factory crankshaft.  Forged steel, fully counterweighted, fully balanced - an exceptional piece.  Must specify which engine your TC has when ordering.  (Early or late build motors use different crankshafts - RDI has both in stock)
Price: Call or e-mail for price

Connecting Rod bearings
Part #: Mas-034
Description:  Factory 16v Masi rod bearings.
Price: $call